精密車銑復合數控機床 Turn-mill composite machine

型號：SKD-550HY

產品時間：2025-07-10

簡要描述：SKD-550HY 精密車銑復合數控機床可一次裝夾即可完成對加工件的精密車削、鉆孔、銑削、剛性攻絲等加工，可實現X/Z/Y 三軸聯動控制 The machine can complete the precision turning, drilling, milling, rigid tapping and other processing of the workpiece with one clamping of it and also achieves X/Z/Y 3 axes linkage control.

產品咨詢服務電話

詳細介紹

SKD-550HY 精密車銑復合數控機床可一次裝夾即可完成對加工件的精密車削、鉆孔、銑削、剛性攻絲等加工，可實現X/Z/Y 三軸聯動控制。

The machine can complete the precision turning, drilling, milling, rigid tapping and other processing of the workpiece with one clamping of it and also achieves X/Z/Y 3 axes linkage control.

特點：

1，機床整體重量約6000Kg重，適合重切前和銑削加工。

2，機床床身采用高低軌結構，高軌滑塊受力均勻。

3，絲杠，導軌采用中國臺灣PMI品牌，導軌采用45mm滾柱形式，適合重切削。

4，機床主軸采用電主軸，力矩大，轉速高，運轉平穩。

5，機床Y軸采用寬距式硬軌結構，傾斜角15度，使Y軸重心低，剛性好。

1.Gross weight is around 6000kg, it specializes high duty cutting and mill-turn processing.
2.It has high and low guideway bed structure,and its weighted balanced by high guideway slider.
3.The screw and guideway were from Taiwan PMI brand,it adopts 45mm roll guideway,which its absolutely suitable for high duty cutting.
4.Its equipped with electrical spindle with large torque,high speed revolution and stable movement.
5.Y axis of machine was equipped with wide-distance type box guideway,which has slant angle 15 degrees and could be able to keep Y axis low center gravity and keep excellent rigidity.

性能參數

		UNIT	SKD-550HY
Working range	Max.swing dia.over bed	mm	φ550
	Max. Working diameter	mm	Φ330
	Max.working length	mm	515
	Max. Bar diameter	mm	φ51
Spindle	Chuck size		8″
	Type of spindle		A2-5
	Spindle bore	mm	φ66
	Spindle top speed	r/min	4000
Feeding	X/Z/Y travel	mm	260/600/±60
	X/Z/Y screw diameter *thread pitch	mm	φ32×10/φ40×10/φ32×6
	X/Z/Y rapid movement speed	m/min	24/24/18
Turret	Type of turret		Power turret
	Number of tool holders		12
	Center height of turret	mm	80
	Tool size：turning/boring	mm	25×25/φ32
	Power tool holder		BMT55/ER32
	Rotation speed of milling axis	r/min	4000
Tailstock	Taper of inner hole of sleeve		MT5
	Sleeve travel/diameter	mm	150/90
	Type of tailstock		Manual
	Driving mode of sleeve		Hydraulic
Motor	Motor power of electric spindle	Kw	19
	Torque of electric spindle (rated/maximum)	Nm	90/200
	X/Z/Y motor power	Kw	3/3/1.8
	X/Z/Y motor torque	Nm	20/20/11
	Motor power of milling axis	Kw	4.5
	Motor torque of milling axis	Nm	18
	Power of cooling pump	Kw	1.0
Other	Power capacity	KVA	40
	Type of machine bed		Overall 15°step rail
	Machine guide ways		Precision linear roller guide ways
	Volume of the hydraulic station	L	40
	Volume of lubrication pump	L	4
	Machine weight	kg	5000
	Outline dimension：length×width×height	mm	2570×1710×1850

產品配置

The joint robot or truss manipulator can be optioned to achieve the automated loading and unloading processing.

產品咨詢

產品名稱:
留言內容：
單位名稱：
您的姓名：
聯系電話：
常用郵箱：
選擇省份：
驗證碼：

上一條：高精度斜床身數控車床 Slant bed cnc lathe

下一條：排刀型車銑復合數控車床 Small gang tool with turn-mill composite lathe